In the first part of this series on paper miniatures I went over the various ways to get the paper miniatures with links to some kick ass guys on drivethrurpg as well as some links to a few custom tutorials. Today I want to continue this series with a short discussion on bases and the pros and cons of each type.
The easiest way to base the paper miniature is to grab a piece of foam core, put a slot in it and insert your figure. It may require a coin or similar on the bottom to give it a little heft. These are cheap, plentiful and with a little work, can look good. This isn't the method I use, but Wyloch goes over it in his video on creating the paper miniature.
The next option is also a DIY option with the caveat that it requires you to have access to a 3d printer. 3d printers can be fairly expensive, especially a genuine Prusa, however there are several models of inexpensive printer that are good for basic printing for a gamer.
I have an A-net A8 which is a decent machine, print quality wise, and gives you the ability to try getting your feet wet for not a lot of money. It is built with cheaper components which should be replaced if you are going to use it a lot though. It will be more than able to print up bases and other things that you might find at a website like thingiverse. These two links are some samples of thingiverse links you can use for basing paper miniatures. Sample 1 Sample 2
Moving away from the DIY option we start to move into some for of clip. The first and cheapest version of these is a binder clip. These are a pretty good solution being easily available, inexpensive and coming in multiple sizes and colors. I don't personally use them, and right now as I am typing this I am wondering why. The only real drawback I can see to these is they will be a little more fiddly when it comes to changing your figures over. You will have to re-insert the metal handles so you can easily open the clip to remove the figure. I think the pros may outweigh the cons here.
You can get a cheap acrylic base designed for boardgames as well. These are pretty good and give you a clear plastic base, and can be purchased in multiple colors. The downside to these is they require a fairly thick card as the clip is fairly wide. I have used these and need to use several layers of construction paper to make them work. Despite how inexpensive they are, I don't really recommend these ones unless your paper figs are quite thick.
The ones I have purchased and use the most are most similar to the binder clips, they can be found sold as "card holders". These are easy to use and replace the figure into. I have only found them in black, which is another strike against this style. The downside to these is they are among the more expensive option, that being said they are still going to run you less than $.50CAD cents each. As much as I like a lot about this style, I doubt I'll be buying more of them.
Litko makes a range of bases for paper figures, similar to the 3d printed model I talk about, these are square or circular and come with a curved slot to hold your figure. The downside to these are two fold. One, they are getting upwards in price, running about $.50CAD each. Two, I don't find litko to have especially friendly shipping options to Canada. If you are in the USA this might be a great option where they will be about $.40USD each and have better shipping options.
Over the past year of using paper miniatures in most of my games I have used several of the above purchaseable solutions. At this time I have not tried the binder clips or 3d printed models, but I think that the binder clips might be the best option being inexpensive, easy to get and in multiple colors. I have also not ordered from Litko. Another possible downside to some of these is that they represent non-standard bases sizes. I don't think it'll take much to make them work, but it's something to think about.
Now that we have our bases and figures, next week we will talk about the process I go through when I assemble these figures! Until next time, keep it weird out there!
'Barbarism is the natural state of mankind,' the borderer said, still staring somberly at the Cimmerian. 'Civilization is unnatural. It is a whim of circumstance. And barbarism must always ultimately triumph.'
-Robert E. Howard
Beyond The Black River
Places of Interest
Subscribe to:
Post Comments (Atom)
Here's another option: window insulation tape. Slap an inch of it down on a cardboard or plastic chip, slice a slit down the center (long-wise), and slot the mini in. Despite being made of a plastic material, insulation tape holds color from markers quite well. Here are some examples:
ReplyDeletehttps://photos.app.goo.gl/FzSjUz5IUVRjLCca2
They're not terribly durable - the slit will expand over time, making for a loser fit, but they're cheap and quick to build. A more durable option is to use 2 pieces of insulation tape side-by-side and slot the mini in the (tiny) gap between them. This is more durable but also takes up significantly more space (the tape is typically 1cm wide, so a double-strip is 2cm).